Glow Gear Classic Camo Series-Traverse Warrior Pants

Dynamic Operator Mobility: DuraStretch® Tech
When the mission demands rapid movement, your uniform cannot hold you back. The Traverse Warrior features premium **DuraStretch® 4-way stretch panels** integrated into the upper back (just below the belt line) and the crotch gusset. This targeted flex technology isolates high-stress movement zones, allowing operators to transition smoothly through deep crouches, high steps, and full-speed sprints without fabric binding or tearing.

Locked-In Protection & 10-Pocket Matrix

• Molded Knee Pads & Elastic Retention: Hit the dirt with confidence. These pants ship with a matching set of high-impact molded tactical knee pads that slide seamlessly into the articulated knee pockets. Pre-stitched elastic retention on the back of the knee ensures the pads stay firmly centered and secure against your joints without shifting during heavy movement.
• Adjustable Ankle Cuffs: Integrated cuff adjustments allow you to cinch the pant legs tight around your combat boots, keeping out mud, debris, and insects while creating a clean, tailored fit.
• 10-Pocket Tactical Loadout System: A precision-engineered storage matrix designed to balance heavy gear evenly across your lower body, preventing sagging, bulk, and noise on the move.
• 2 Main Hand Pockets: Deeply recessed, clean-edge open pockets for traditional, low-profile access to daily essentials.
• 2 Rear Pockets: Flat, low-profile slots optimized for wallets, administrative notebooks, or maps.
• 2 Expandable Cargo Pockets: High-volume side compartments built to carry IFAKs, extra ordnance, or water bottles.
• 2 Top Zippered Pockets: Mounted cleanly above the main cargo bays for high-speed, secure protection of smartphones, GPS tracking units, or passports.
• 2 Quick-Access Utility Pockets: Dedicated vertical slots tailored for pistol magazines, multi-tools, flashlights, or chem lights.

Core Tactical Specifications

• Classic Camo Pattern Combat Pants.
• Secure Fit Engineering: Built-in elastic knee stabilizers and customizable ankle cuff tabs.
• Dual Zippered Security: Heavy-duty, grime-resistant closure hardware prevents high-value gear loss during intense physical exertion.
• Reinforced Infrastructure: Heavy bartacking at all critical stress points and seams prevents structural failure under maximum cargo loads.

Specifications

• Primary Fabric: Nylon, Cotton Blend fabric.
• Stretch Engineering: Dual-zone DuraStretch® 4-way stretch panels (Upper Back & Crotch)
• Knee Configuration: Pre-stitched elastic retention backing + included molded tactical knee pads.
• Lower-Cuff with Concave Cut: This ergonomic shape allows the pant leg to rest cleanly over the instep of a heavy boot without bunching up, shifting, or creating trip hazards, with built-in cuff adjustment tabs.
• Pocket Matrix: 10 functional tactical pockets
• Belt System: Reinforced, 2″ wide loops capable of supporting heavy-duty tactical battle belts and holsters
• 2-inch waist with Adjustment: Adjustment tabs on both sides for fine-tuning.

Material

• Nylon Cotton blend fabric.
• U.S. Made DuraStretch® 4-way stretch panels.

Weight

• Approximately 780g on Medium Regular, with pads.

Gear up with the O.P.S. Traverse Warrior Pants

The definitive choice for aggressive field operations, tactical training, and mission-critical deployment. Engineered from the ground up to match a strict tactical aesthetic and functional theme, these combat trousers are manufactured using original, licensed military-specification materials to deliver authentic NIR (Near-Infrared) signature reduction and superior tear resistance.

Dynamic Operator Mobility: DuraStretch® Tech
When the mission demands rapid movement, your uniform cannot hold you back. The Traverse Warrior features premium **DuraStretch® 4-way stretch panels** integrated into the upper back (just below the belt line) and the crotch gusset. This targeted flex technology isolates high-stress movement zones, allowing operators to transition smoothly through deep crouches, high steps, and full-speed sprints without fabric binding or tearing.

Locked-In Protection & 10-Pocket Matrix

• Molded Knee Pads & Elastic Retention: Hit the dirt with confidence. These pants ship with a matching set of high-impact molded tactical knee pads that slide seamlessly into the articulated knee pockets. Pre-stitched elastic retention on the back of the knee ensures the pads stay firmly centered and secure against your joints without shifting during heavy movement.
• Adjustable Ankle Cuffs: Integrated cuff adjustments allow you to cinch the pant legs tight around your combat boots, keeping out mud, debris, and insects while creating a clean, tailored fit.
• 10-Pocket Tactical Loadout System: A precision-engineered storage matrix designed to balance heavy gear evenly across your lower body, preventing sagging, bulk, and noise on the move.
• 2 Main Hand Pockets: Deeply recessed, clean-edge open pockets for traditional, low-profile access to daily essentials.
• 2 Rear Pockets: Flat, low-profile slots optimized for wallets, administrative notebooks, or maps.
• 2 Expandable Cargo Pockets: High-volume side compartments built to carry IFAKs, extra ordnance, or water bottles.
• 2 Top Zippered Pockets: Mounted cleanly above the main cargo bays for high-speed, secure protection of smartphones, GPS tracking units, or passports.
• 2 Quick-Access Utility Pockets: Dedicated vertical slots tailored for pistol magazines, multi-tools, flashlights, or chem lights.

Core Tactical Specifications

• Authentic Heritage: Original, licensed Mil-Spec material built to strict operational standards for durability and colorfastness.
• Secure Fit Engineering: Built-in elastic knee stabilizers and customizable ankle cuff tabs.
• Dual Zippered Security: Heavy-duty, grime-resistant closure hardware prevents high-value gear loss during intense physical exertion.
• Reinforced Infrastructure: Heavy bartacking at all critical stress points and seams prevents structural failure under maximum cargo loads.

Specifications

• Primary Fabric: Original, licensed Mil-Spec material
• Stretch Engineering: Dual-zone DuraStretch® 4-way stretch panels (Upper Back & Crotch)
• Knee Configuration: Pre-stitched elastic retention backing + included molded tactical knee pads.
• Lower-Cuff with Concave Cut: This ergonomic shape allows the pant leg to rest cleanly over the instep of a heavy boot without bunching up, shifting, or creating trip hazards, with built-in cuff adjustment tabs.
• Pocket Matrix: 10 functional tactical pockets
• Belt System: Reinforced, 2″ wide loops capable of supporting heavy-duty tactical battle belts and holsters
• 2-inch waist with Adjustment: Adjustment tabs on both sides for fine-tuning.

Material

• Original, licensed Mil-Spec Nylon Cotton blend fabric.
• U.S. Made DuraStretch® 4-way stretch panels.

Crye Multicam®: Cordura® brand 50/50 NYCO mil-spec fabric, NIR, no melt, no drip.

A-TACS® IX: Cordura® brand 50/50 NYCO mil-spec fabric, NIR, no melt, no drip.

A-TACS® FG-X, AU-X: Cordura® brand 55/45 NYCO extreme fabric, NIR, no melt, no drip.

Weight

• Approximately 780g on Medium Regular, with pads.